"The quality of cabinets, closets, and bathroom cabinets is good or not, and the quality of the sealing edge is definitely a detail that can not be ignored." This is the opinion of many industry insiders and is also the purchase standard of many consumers at present.
As the board furniture processing process, the sealing link should be the most important and rare link. Without correct or low-quality sealing, it will affect the final use of a furniture. The importance of sealing the edge can be imagined. For furniture makers, there has been a stampede in recent years to upgrade their own edge seals to improve the quality of the final product of the furniture. Needless to say, having a high-precision, multifunctional, industrial-grade sealing machine has become a number of advanced plate processing enterprises breaking the demand. In the current wave, whether the company really understand the sealing machine, may also need to put a question mark.

The sealing machine functions include: pre-milling, coating, tie-head, rough repair, finishing, scraping, polishing, slot. Mainly used for plate furniture and wood door production.

1. Premilling: The ripple marks, burrs, or non-vertical phenomena caused by the cutting saw after processing with a double milling cutter are modified again to achieve better sealing effect. Make the sealing edge bar and plate closer to the joint, the integrity and beauty of the better. 1. Coating: Through a special structure, the sealing plate and the sealing material are evenly coated on both sides to ensure that the adhesion force is more solid.
2. Coating: Through a special structure, the sealing plate and the sealing material are evenly coated on both sides to ensure that the adhesion force is more solid.

3. The same head: Through the precise linear guide rail movement, adopts the automatic tracking of the mold and the rapid cutting structure of the high-frequency high-speed motor to ensure that the cut section is smooth and smooth.
4. Cuisine / Cuisine: All use automatic tracking and high frequency high-speed motor structure to ensure the smooth and smooth upper and lower parts of the trim plate. Used for repairing the excess edge material above and below the plate seal bar.
1) Crude repair function: Crude repair knife is a flat knife. The finishing of excess parts in order to process the bark. Because when sealing the wood skin, it is not possible to directly use the finishing knife R-shaped knife. The wooden skin is generally 0.4 mm thick. If the finishing knife is used directly, it is easy to cause fractures. In addition, rough repairs can also be used to seal the first repair process of PVC and acrylic.
2) Refining function: Refining knife is R-shaped knife. It is mainly used for PVC and Acrylic sealing edge strips for plate furniture, and it is better to cover the edge strips with a thickness of 0.8 mm or more.

5. Scrubbing: Used to remove ripples caused by the cutting process of the trim edge, making the upper and lower parts of the plate more smooth and tidy.
6. Polishing: Clean up the finished plate with a cotton polishing wheel, and smooth the end of the seal through polishing.
7. Slot opening: For the closet side plate, bottom plate, etc.. Direct slot opening, reduce the cutting board saw process is more convenient and faster; It can also be used to slot the aluminum edge of the door plate.

1. If a thick sealing band is used to seal the edge, the tension of the sealing machine press roller should be adjusted to the best position. The most common problem is to press too tight. Since the sealing band is slightly longer than the workpiece, when the press roller presses the sealing band to grow out of the part, a vertical Yujin force is brought to the sealing edge. At this time, due to the incomplete curing of the adhesive, the adhesive strength is not high. The tail is easy to loosen and sticky.

2. The indoor temperature must not be too low during processing. Generally, it should be above 15 °C. In particular, when the sealing band is thick, the flexibility will be insufficient. It is necessary to ensure the normal operation of the preheating device. If there is no preheating device, the sealing band can also be softened by means of hairdryer heating. The Fangfayouqi is suitable for curve sealing. There shall be no customs in the processing shop.
The quality of the sealing band affects the sealing effect. The quality of the sealing band seals the tight sealing edge of the product, and the quality of the sealing band seals the gap at the sealing edge of the product. There is a clear black line. When the machine is repaired, it is easy to scratch traces on the surface. From the section of the thick edge belt, the middle of the adhesive surface should be slightly concave than the two sides. The sealing edge of the product sealed by the edge belt is more rigorous and has better results.
3. The moisture content of the solid wood sealing material should not be too high. It should be stored in a cool and dry room. The base material requires no dust, and the best moisture content is 8-10 <UNK>.

4. Due to the fast sealing speed, adhesives must have good dispersion and permeability to the substrate under low pressure, and they must have good initial viscosity. They should be instantly glued and bonded under a short period of pressure. When using, care should be taken to ensure that the temperature of the hot melt glue is within the normal temperature range, and a long period of high temperature will make the glue score; Hot melt glue can not achieve good fluidity at low temperatures, and it must be used with good data provided by suppliers.
5. The amount of hot melt adhesive coating should be based on slightly extruding the adhesive outside the adhesive parts, which is too large. There is a black line at the sealing edge, which affects the beauty; Too small, not enough bonding strength. In order to check whether the film is continuous, transparent hard PVC can be used to bring the test; It can also be used to seal the edge of the ordinary edge, and when the adhesive is not cooled, the edge belt can be torn off to test.

6. For the use of the front milling cutter device of the sealing machine, the quality of the semi-finished product to be sealed also affects the sealing effect. In order to prevent the product from breaking the edge, the general manufacturer will use an engraved saw(commonly known as a small saw blade) when cutting. The best effect after cutting is that the small saw blade can be seen at the section but can not feel it. When the small saw blade marks are too deep to seal the edge, a black line can be seen at the edge and even a gap can be seen. It is too shallow and explosive.